RENAULT CAN K-LINE ECU TOOL LATEST VERSION

Description

OBDII tool with various Renault car electronic control unit internal memory modification functions, such as Read/Write EEPROM or FLASH, Clear Immobilizer Code, Read Immobilizer Status and Program Cards. There is no need to open control unit, de-solder memory IC or connect any wires directly to it. All functions works by OBDII connector, but any supported control unit can be connected "on the bench" using Connection Manual. Clear Immobilizer Code function is fully automated - just press button and control unit will be cleared. ECU is ready to accept new immobilizer code after previously programmed code is cleared - no future programming is required. Renault ECU Tool V4.21 (March 20, 2026) Added IMMO-OFF for Siemens SIM32. Both systems, IMMO-BY-CAN and IMMO-BY-WIRE are supported. No need to cut any CAN-BUS wires. Improved IMMO-OFF for Sagem S2000. ECU no longer learns code from UCH when connected to the car. Improved CAN IMMOBILIZER EMULATOR feature. Emulator works fine now on both CAN speeds. CAN Immobilizer system emulation to unlock ECU on-the-bench CAN Immobilizer system: read ECM_SYNCHRO from UCH/BCM/HFM ABS/ESP (ATE) for X91/X95/X38/L70 - EEPROM R/W, Change VIN, Change KM by OBDII Automatic parking brake (TRW) for X95/X38 - R/W Config, Change VIN, set maintenance mode for breakpad replace Automatic parking brake (Temic) for X91/X43 - R/W Config, Change VIN EDC17 / SID305-310 / DCM3.4 / EMS31XX MILEAGE REPAIR by OBD II EDC15C3 (both CAN-BUS and WIRE immo systems) - R/W EEPROM, R/W FLASH, Reset to VIRGIN EDC15C13 - R/W EEPROM, R/W FLASH, Reset to VIRGIN SAGEM S2000 - R/W EEPROM 95080, R/W FLASH AM29F200BB by K-Line, reset to VIRGIN, IMMO-OFF, repair CRC (NEW FEATURES!) SIRIUS 31H - R/W EEPROM, R/W FLASH, Reset to VIRGIN, IMMO-OFF, repair CRC SIRIUS 32[N] (both CAN-BUS and WIRE immo systems) - R/W EEPROM, R/W FLASH, Reset to VIRGIN, IMMO-OFF (BY-WIRE only), repair CRC SIRIUS 34 (both CAN-BUS and WIRE immo systems) - R/W EEPROM, R/W FLASH, Reset to VIRGIN, repair CRC SIRIUS 35 - R/W EEPROM, R/W FLASH, Reset to VIRGIN, repair CRC EMS3132 (both CAN-BUS and WIRE immo systems) - R/Write EEPROM, R/W FLASH, Reset to VIRGIN, IMMO-OFF (BY-WIRE only) repair CRC EMS3134 (both CAN-BUS and WIRE immo systems) - R/W EEPROM, R/W FLASH, Reset to VIRGIN, repair CRC SID301 - R/W EEPROM, R/W FLASH, Reset to VIRGIN, Clear IMPACT DETECTED, Read stored mileage SIM32 - R/W EEPROM, R/W FLASH from HD64F7055, Reset to VIRGIN, repair FLASH CRC SAFIR / SAFIR2 / SFR200 (35 / 55 pin connector) - Read TMS374 EEPROM, Reset to VIRGIN (car runs without immobilizer code) IAW 6R.20 - R/W TMS370 EEPROM IAW 6R.30 - Read TMS370 EEPROM, Reset to VIRGIN (car runs without immobilizer code) VALEO BII for ESPACE III - R/W (9)08AZ60 EEPROM, Read/Write mileage, Clear for Replacement, Read transponder data, Emergency Startup VALEO IMMOBILIZER for LAGUNA I Ph2 (1998-2000) - Read transponder data, Configure, Reset to VIRGIN VALEO IMMOBILIZER for LAGUNA I Ph1 / SAFRANE Ph1 (1995-1996) - Read PINCODE, Reset to VIRGIN INSTRUMENT CLUSTER for ESPACE III (1998-2002) - Reset odometer, Erase RF remote programming by instrument cluster connector SIEMENS IMMOBILIZER for ESPACE III Ph1 (1996-1998) - Read/Write 68HC05B16 EEPROM, read transponder data INSTRUMENT CLUSTER for ESPACE IV Ph1 ('03-'04) K-Line - Change language and units, Change VIN, KM, Read/Write EEPROM, reset to factory defaults INSTRUMENT CLUSTER for ESPACE IV Ph2-Ph4 ('2005+) CAN - Change language and units, Change VIN, KM, Read/Write EEPROM SIEMENS UCH for MEGANE/SCENIC I Ph2 ('99-'02) - R/W 705B32 EEPROM, Read/Write configuration, Learn Keys, Reset to VIRGIN SIEMENS UCBIC for MEGANE/SCENIC I Ph1 ('96-'98) - R/W 68HC05B16 EEPROM, Read/Write configuration, Resest to VIRGIN LAGUNA II, ESPACE IV, VELSATIS Ph1/Ph2 - KeyCard Programming, Change VIN. Reset UCH to VIRGIN, Learn UCH MEGANE II, SCENIC II Ph1/Ph2 - Card/UCH/ECM/ESCL Learning, Change VIN, Reset UCH to VIRGIN, Config TPMS INSTRUMENT CLUSTER for SCENIC II ('04-'08) - Wake-Up by CAN-BUS for repair or to check mileage, Change language and units, Change VIN, KM, Read/Write EEPROM INSTRUMENT CLUSTER for MEGANE II ('03-'08) - Wake-Up by CAN-BUS for repair or to check mileage, Change language and units, Change VIN, KM, Read/Write EEPROM CLIO II Ph1 - Key Learning, Configuration, Reset BMT to VIRGIN, calculate transponder data from loaded 93C46 dump and from key label CLIO II Ph2-5, KANGOO, TRAFIC, MASTER, VIVARO, MOVANO (-'07) - R/W EEPROM 93C66, Key Learning, Change VIN, Reset UCH to VIRGIN, Learn UCH KANGOO I, TRAFIC, MASTER, VIVARO, MOVANO ('07-) - Key Learning, Change VIN, Reset UCH to VIRGIN, Learn VIRGIN UCH KANGOO II (2007-2012) - Key Programming, Change VIN, Reset BCM to VIRGIN, Learn VIRGIN BCM MODUS / CLIO III ELECTRIC POWER ASSISTED STEERING (TRW DAE/PAS) - Clear Immo Code, Change VIN by OBDII, erase DF002 from 24C16 dump, repair CRC MEGANE/SCENIC III ELECTRIC POWER ASSISTED STEERING (NSK DAE/PAS) - Clear Immo Code, Change V